Updated 20 November 2026. Sources: HoloSolis statements, European Commission, ENEA and Italian official texts.
Leggi in italiano: Gigafabbrica HoloSolis: chiusa la Serie A da 15 milioni, ma la produzione parte nel 2029.
The HoloSolis gigafactory, a French project to make solar cells and modules at Hambach, near Sarreguemines in the Grand Est region, has closed a Series A round of more than €15 million. Four new shareholders join: Crédit Agricole Group, through four regional banks, Algebris Investments, Trinasolar and StarCharge, alongside existing investors Calès Technologies, Forming and Ecolab. In the same period the project, called SOLAR4EU, was selected for support from the European Commission’s Innovation Fund, but the grant agreement is still being finalised, so the money has not been awarded yet.
The company says the financing and support identified now exceed €400 million. That figure combines private capital and public funds at different stages, including European support that is not yet signed, and it compares with an estimated plant cost of about €1 billion, which leaves slightly under €600 million still to be raised. The HoloSolis website describes a plant of 5 GW a year of cells and modules, about 10 million panels, with close to 2,000 direct jobs at full capacity.
The schedule matters most to anyone buying modules today. Communications from November 2026 point to construction starting in 2028 and production in 2029. The project page on the company website still shows construction in 2027 and first modules in 2028, and earlier plans spoke of production as early as 2025. For module deliveries in the next few years, HoloSolis is not an available supplier.
HoloSolis gigafactory: the figures and the status of each one
The table separates what is closed, what the company has announced and what is still to be confirmed.
| Item | Figure | Status |
|---|---|---|
| Series A | More than €15 million; new shareholders Crédit Agricole Group, Algebris Investments, Trinasolar, StarCharge | Closed, announced in November 2026 |
| Financing and support | More than €400 million, private and public | Company figure; includes European support not yet signed |
| Plant cost | About €1 billion | Estimate; the remaining financing is still to be raised |
| Innovation Fund | SOLAR4EU project selected; amount not disclosed | Grant agreement being finalised |
| Capacity | 5 GW a year, about 10 million panels | At full capacity, per the company |
| Jobs | About 2,000 direct jobs | Company estimate, at full capacity |
| Technology | TOPCon, under a licence of Trina patents | Licence signed in 2025 |
| Letters of intent | More than 30 GW from future customers | Not contracts |
| Schedule | Construction in 2028, production in 2029 | November 2026 announcements; the company website shows 2027 and 2028 |
TOPCon under a Trina licence, with Trina on the cap table
HoloSolis will use TOPCon technology under a licence of Trina Solar patents, and the Chinese group is now also a shareholder and technical partner in the project. Cells and modules would be made in France, while the technology comes from a non-European manufacturer: for readers who take the word “European” as a guarantee about the supply chain, this is a detail to keep in mind. One point of scope also needs clarifying. The company speaks of cells and modules at the same site, while part of the coverage describes the plant as a module assembly facility. The difference matters, because the Italian Made-in-EU requirements concern the cells. For a comparison of the two technologies on commercial and industrial roofs, see our analysis of TOPCon and HJT modules (in Italian).
What it means for Italy’s Made-in-EU register and for 3Sun
Italy’s ENEA register of photovoltaic technologies, created by Article 12 of Decree-Law 181/2023, splits European modules into three sections. Section B requires modules and cells made in the European Union with a cell efficiency of at least 23.5%. Section C requires bifacial silicon heterojunction or tandem cells, made in the Union, with a cell efficiency of at least 24%. Italy’s 2026 enhanced-depreciation incentive for business investments, the iperammortamento, admits only modules in sections B and C, with ceilings of €840/kW for B and €940/kW for C on plants above 1 MW, as we reconstructed in our comparison of Chinese and EU modules (in Italian).
3Sun, the Enel Green Power factory in Catania, is today the only European producer active in section C, with limited availability, as we documented in our piece on the 3Sun bottleneck (in Italian). HoloSolis makes TOPCon, so its modules could not qualify for section C, which requires heterojunction or tandem cells. They could qualify for section B, on two conditions: cells made in the Union with a cell efficiency of at least 23.5%, and registration with ENEA. In our end-of-August analysis section B had no registered modules, so a producer of European TOPCon cells would be the first candidate to fill it.
For 3Sun there is no short-term threat in this. HoloSolis modules will not arrive before 2029, the financing is incomplete, and 3Sun remains the only European producer in section C, with a stated capacity target of 3 GW a year against HoloSolis’s planned 5 GW. The European framework that pushes demand for EU-made modules is the Net-Zero Industry Act, and its effect on Italian auctions and bankability is covered in our NZIA and bankability article (in Italian).
What to watch in the coming months
Four things are worth following: the signing of the Innovation Fund grant agreement, after the Commission selected 77 projects worth €3.4 billion on 19 October 2026; the raising of the remaining financing, which the company names as its next step; the conversion of the letters of intent into contracts; and, for the Italian market, any application to the ENEA register.
Frequently asked questions
Where will the HoloSolis factory be and how much will it produce
At Hambach, near Sarreguemines, in the Moselle area of France’s Grand Est region. At full capacity the company indicates 5 GW a year of cells and modules, about 10 million panels.
When will HoloSolis modules be available
November 2026 communications point to construction in 2028 and production in 2029. The company website still shows 2027 and 2028, and earlier plans indicated 2025, so the schedule has already slipped more than once. It is not an option for supplies in the next few years.
Has the EU money already been awarded
No. SOLAR4EU was selected under the Innovation Fund, but the grant agreement is still being finalised and the amount has not been disclosed.
Could HoloSolis modules qualify for the Italian iperammortamento
Only through section B of the ENEA register, and only if the cells are made in the European Union with a cell efficiency of at least 23.5% and the products are registered. Section C is out of reach for TOPCon, because it requires heterojunction or tandem cells.
Does Trina Solar control HoloSolis
Trinasolar is one of the four new Series A shareholders and has licensed its TOPCon patents to the project. The stakes of individual shareholders do not appear in the communications available.
More from AssoSolare
Another Italian rule with a deadline for operators is covered in our piece on FER X decree 119, including the Net-Zero Industry Act requirements that apply from entry into operation. For the Italian side of the module market, see our analysis of the 3Sun bottleneck (in Italian) and our comparison of Chinese and EU modules (in Italian).
Institutional references
The text of Article 12 on the register of photovoltaic technologies is in Decree-Law 181/2023 as published in the Italian Official Gazette, and the list of registered products can be consulted on the ENEA page on access to the photovoltaic modules register. For the European framework, Regulation (EU) 2024/1735, the Net-Zero Industry Act and the European Commission’s Innovation Fund page set out the legal context and the calls.
